CAMAROPULSE™ Compatible with Chevrolet 2 Pcs Carbon Fiber for Emblem Front/Back

Competible with Chevrolet Silverado 1500 Truck, Tahoe SUV, Passenger Van, Impala, Malibu, Aveo, Cruze, Captiva, Spark Sonic Equinox, Avalanche, Suburban, Colorado, Trailblazer, Cobalt, Cavalier, Camaro, Cars

FLEXIBLE -can be applied to extreme curved surfaces with a little patience and work When heated and stretched it

EASY PLACEMENT - 3M 1080 Wrap Allows for the film to be repositioned on the substrate until the correct position is achieved. As soon as firm squeegee pressure is applied an initial bond is achieved non-visible air release channels to give fast, easy and bubble-free installations

Do-it-yourself - Custom cut around your Grill and Rear (tailgate/trunk lid) Bowtie Emblems

Do-it-yourself - Custom cut around your Grill and Rear (tailgate/trunk lid) Bowtie Emblems
You are purchasing 2 rectangular sheets of your choice of color Vinyl 11" x 5" to wrap your Bowties with.
Great way to customize your -
Your choice of colors GLOSS BLACK, MATTE BLACK, WHITE, RED, HOT PINK, SOFT PINK, BLUE, LIGHT BLUE, STEELE BLUE, ORANGE, LIME GREEN, PURPLE, METALLIC GOLD, METALLIC SILVER, YELLOW
Tools needed X-Acto Knife with new blade, CC Card or squeegee
Please ask any questions before buying.
You are NOT purchasing any replacement emblems, These are NOT pre-cut, you are taking it upon yourself or having some one to cut around your vehicles emblems with vinyl that is supplied.
Tools needed: Bladed Utility knife & plastic squeegee (not included).
How to Install? 1. Thoroughly clean the surface 2. When dry, peel the paper backing from the vinyl sheet and apply. 3. Once vinyl is applied, you can use heat to apply on curved surfaces with a little patience and work. Use a heat gun or hair dryer and softly press the film into place with a rubber squeegee or by hand. 4. Take a sharp utility blade or exacto knife and carefully cut vinyl to shape and peel excess away.
Easily and inexpensively customize 3M . Vinyl Wrap Product